New
Features:
1. The pure copper motor is of high quality and the product is sturdy and durable. The new statorand rotor of the motor can easily realize the conversion of electrical energy and mechanical energy.
2.Diamond chassis is sharp, hard, wear-resistant, work efficiency and high quality.
3.High performance, stable life, long service life.
4.Highly adaptable cement floors can also be fully hardened and work can be done at the root of the wall.
5.With dust suction fan, dust-free operation.
6.The machine has no plug, please connect it to the air switch when using it.
Parameter:
Grinding Width: 400mm
Working Speed: 720r/min
Voltage: 220V
Power: 4kw
Fan Power: 0.75kw
Maximum Airflow: 180mm³/h
Maximum Pressure: 220mbar
Dust Loading Capacity: 24L
Precautions For Use:
1. The input voltage should not be too low.
2. When using, first lift the machine head off the ground,and then turn on the switch. When the machine head rotates normally, gently place it on the ground.
3. When working, the machine head swings left and right, then moves forward, and cannot stop in place.
4. In case of power failure during operation, the switch should be reset and cannot be stopped at the original position to avoid burning the motor when the power is on.
5.If a generator is used to provide power, the output power of the generator must be at least 12KW.
- 【Dust-free Operation】With dust suction built-in fan, dust-free operation. 11-layer coated filter element has an area three times larger than the traditional flat filter element,effectively filtering dust and ensuring the normal operation of the fan.
- 【Widely Application】Widely used in the polishing of new and old epoxy floors, solidified floors, terrazzo floors, emery floors, self-leveling floors, refurbished concrete floors, etc， suitable for the restoration of the flatness of the new ground, roughening the surface, and refurbishing the old epoxy and so on.
- 【Highly Adaptable】Suitable for restoration of flatness of new floors and renovation of old floors. Highly adaptable cement floors can also be fully hardened and work can be done at the root of the wall. Variety of grinding heads available, can be replaced freely according to the construction site.
- 【Excellent Design】Powerful pure copper motor and high-speed bearings ensure stable operation. The distance between the chassis and the floor can be adjusted by adjusting the height of the wheels. The height of the handle also can be adjusted.
- 【Easy to Use】Pull-out dust box, work for 20-30 minutes, shake the rod 8-10 times to remove the dust in the filter element and keep the fan running normally.
